Products Range
Tachometer
Digital RPM Indicator DRI-27xxxx
| Part Numbers: | |
| DRI-2700, DRI-2721/OS | |
| Specifications: | |
| Operating Voltage | 230V AC 50 Hz 24V DC |
| Display | 3 & 1/2 digit seven segment LED display |
| Range | 0-9999 RPM |
| Accuracy | ± 1% of F.S.R. |
| Relays | 1 Relay Output |
| Enclosure | 96 x 96 x 125 mm |
| Panel cutout | 92 x 92 mm |
| Special Features: | |
| • Over speed Indication on the front | |
| • User settable Over speed Set points | |
| • Also available in 85mm Dia Enclosure | |
Digital Tacho- Hour Meter DTHM-2700xxx
| Part Numbers: | |
| DTHM-2700xxx | |
| Specifications: | |
| Operating Voltage | Internal Battery Operated |
| Display | 4 digit seven segment LCD display |
| Range | 0-9999 RPM 0-9999 Cumulative Hrs |
| Accuracy | ± 1% of F.S.R. |
| Enclosure | 85 mm diameter Nylon 6 enclosure |
| Panel cutout | 85 mm OD |
| Special Features: | |
| • Low Battery Indicator (for Battery operated Tachometer) | |
| • Hours switch for displaying cumulative hours | |
Digital Tacho- Hour Meter with over speed DTHM-2700M
| Part Numbers: | |
| DTHM-2700M | |
| Specifications: | |
| Operating Voltage | 0 – 40 V DC ( 0-60 V DC for HV Mode ) |
| Display | Graphic LCD display with inbuilt backlight |
| Range | 0-9999 RPM 99999 Cumulative Hrs with 1 min resolution |
| INPUT | Sine wave from magnetic pick-ups |
| Accuracy | ± 1RPM over the range |
| Enclosure | Nylon 6 |
| Size | 85 mm OD |
| Special Features: | |
| • Microcontroller based design | |
| • Combine display for RPM, HOUR, Set point 1 / 2, & seted Teeth gear | |
| • Selectable Teeth gear 000 to 999 TG | |
| • EPROM memory for hours | |
| • Two relay outputs for crank termination & over speed RPM can be set by switches | |
Digital Tacho- Meter with over speed DTM-272xxx
| Part Numbers: | |
| DTM-2721, DTM-2722 | |
| Specifications: | |
| Operating Voltage | 24 V DC |
| Display | 4 digit LCD display |
| Range | 0-9999 RPM |
| INPUT | Sine wave from magnetic pick-ups |
| Accuracy | ± 1RPM over the range |
| Enclosure | Nylon 6 |
| Size | 85 mm OD |
| Special Features: | |
| • Over speed switch for O/S testing | |
| • Backlight switch for display in night vision | |
| • Selectable switch for Teeth gear | |
| • Two relay outputs for crank termination & over speed RPM | |
| • Over speed indicating LED on front | |
Digital Tachometer with OS DTR-2722
| Part Numbers: | |
| DTR-2722 | |
| Specifications: | |
| Operating Voltage | 230V AC, 24V DC, 12V DC |
| Display | 3 & 1/2 digit seven segment LED display |
| Range | 0-9999 RPM |
| Accuracy | ± 1% of F.S.R. |
| Relays | 2 Relay Outputs at specified RPM |
| User Settable | Teeth Gear : 1-250 Two Set points : 0-9999 RPM |
| Enclosure | 96 x 96 x 110 mm |
| Size | 92 x 92 mm |
| Special Features: | |
| • User settable Teeth gear and Set points | |
| • Over speed Indicator on front | |